Introduction
The SX-600Ethernet to Wireless Client Adapter allows you to easily add 802.11 b/g wireless capabilities to any Ethernet product. It is ideal for connecting Ethernet enabled printers, scanners, and multifunction printers (MFPs) to a wireless network without having to change drivers or management utilities. The SX-600 also brings 802.11 b/g wireless capabilities to Ethernet enabled product such as desktop or laptop computers, point of sale terminals, medical devices, and networked industrial control devices.
Once configured, the SX-600 is platform independent so it will work with any operating system and any network device. It provides Ethernet pass-through to the wireless network for network features already provided by your Ethernet enabled device. The SX-600 includes an RJ-45 connector for an auto-sensing 10/100 Ethernet, a reset button, a power jack, LEDs for status indication, 802.11b/g WLAN connectivity, and a serial port for configuration or diagnostics.
Package Contents
SX-600 Adapter
Power supply adapter
Installation CD
Hardware Installation Guide
Crossover Ethernet Cable
Windows™ System Requirements
To configure the settings of the SX-600 using the provided ExtendView Utility in Windows, your Windows-based system should include the following components:
•A PC with a 133 MHz or higher processor
•Microsoft Windows 98SE, ME, 2000, XP, or 2003 server operating system
•At least 64 MB of RAM (memory)
•At least 10 MB of free hard disk space (to install the software)
•A CD-ROM drive (to load the software)
•An Internet connection (for online product registration)
Other Operating Systems
Users can access the configuration settings for the SX-600 through a standard web browser by entering the IP address of the SX-600 into the address bar.
