Silex technology SX-600

SX-600 User’s Manual

7. Configure your wireless settings to match that of your wireless network. First choose the

Wireless Mode and type in the SSID of your wireless network.

Mode

For Mode, AD-HOC means the wireless network is composed of stations without access

points. INFRASTRUCTURE mode means all data is being passed through a central

access point.

SSID

The Service Set Identifier is used by stations to select the wireless network with which to

communicate.

Configure Bridge via:

The SX-600 will only allow configuration from one network interface at a time. While both

network interfaces (wired and wireless) are enabled to transmit and receive raw packets,

only one interface can be active for configuration (HTTP, Telnet or SNMP) purposes at a

time. The default interface is wired, but it can be changed to the wireless interface by

clicking on Wireless Connection.

Once you have entered the correct wireless mode and SSID for your wireless network,

click on Wireless Security. The other settings on this page don’t normally need to be

changed.