5.Click Change Profile and select a profile based on the device you have connected to your port. Custom will expose all settings.
6.Click Apply to save the profile. The interface will determine any additional settings and advise you what tab to click next.
7.A port profile or port options page will come up and ask for additional parameters if needed. Enter the appropriate parameters and click Apply.
Configuring the Serial Port Settings from the Command Line
Use the set ports, set line, and set flow commands from the Digi One/
PortServer TS 2/4 Command Reference to set the serial port settings.
26 | Chapter 7 Configuring the Serial Ports |
