Procedure
1. To configure the port for a modem, enter the following command:
set ports range=range dev=device
where range is the port or ports and device is one of the following:
•mout for outbound only modem connections
•mio for bidirectional modem connections.
See the set ports command in the Digi One/PortServer TS Command Reference for more information.
Example: set ports range=3 device=mout
2. To configure flow control for the ports, enter the following command:
set flow range=range
where range is the port or ports and
Example: set flow range=3 ixon=off ixoff=off rts=on cts=on
See the set flow command in the Digi One/PortServer TS Command Reference for more information.
3.To configure baud rate for this connection to the modem, enter the following command:
set line range=range baud=bps
where range is the port or ports to configure and bps is the line speed in
Example: set line range=3 baud=115000
4.If you do not want to use the
See the set script command in the Digi One/PortServer TS Command Reference for more information.
5.If you do not want to use the
set device name=name ports=ports dialer=name
where
•name=name is the name for this device
•ports=ports are the ports to associate with this device
•dialer=name is the name of a dialer script, either the
6.To create a PPP user, enter the following command:
set user name=name protocol=ppp
where name is the name of the PPP user
Example: set user name=pppout protocol=ppp
Chapter 8 Configuring PPP | 29 |
