Silex technology SX-600

SX-600 User’s Manual

Declaration of Conformity (FCC)

According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU

Boards and Power Supplies used with Class B Personal Computers:

We: silex technology america, Inc.

Located at: 157 West 7065 South

Salt Lake City, UT 84047, USA

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2

and 15 of the FCC rules as a Class B digital device FOR HOME OR OFFICE USE. Each product

marketed, is identical to the representative unit tested and found to be compliant with the

standards. Records maintained continue to reflect the equipment being produced can be

expected to be within the variation accepted, due to quantity production and testing on a

statistical basis as required by 47CFR §2.909. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Trade Name: silex

Product: Ethernet to Wireless Client Adapter (802.11b and 802.11g enabled)

Model No.: SX-600

silex technology america, Inc. hereby declares that the equipment specified above conforms to

the above requirements.

Standards used and met in the assessment:

EN55022: 1998 Class B; CFR Title 47, Part 15, Subpart B and Subpart C.

Information for Canadian Users (IC notice)

The term “IC” before the radio certification number only signifies that Industry of Canada technical

specifications were met. Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

To prevent radio interference to the licensed service, this device is intended to be operated

indoors and away from windows to provide maximum shielding. Equipment that is installed

outdoors is subject to licensing.

This device has been designed to operate with an antenna having a maximum gain of 2 dB.

Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The

required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so

chosen than the equivalent isotropically radiated power (EIRP) is not more than the required for