Silex technology SX-600 - page 11

SX-600 User’s Manual
11
8. Enter your wireless security settings to match that of your wireless network network.
Key Selection
If WEP encryption is selected, and the authentication mode is not an EAP (802.1x) mode,
select the desired WEP key to be used, one through four.
WEP Key
These fields are ignored unless the encryption mode is 64 or 128 bit WEP. Enter up to 10
hexadecimal digits for 64 bit WEP, or 26 hexadecimal digits for 128 bit WEP.
Authentication Type
Choose type of authentication to be performed with the network access point, or with a
peer unit in Ad-hoc mode.
User ID
Enter the logon user ID that the server uses to authenticate to the 802.1x-enabled
network. The user ID and password must be in the authentication server database, and is
used in TTLS, LEAP, and PEAP configurations. The default user ID is 'anonymous'. A
realm defines a grouping of users. If a realm is required for your network, it is separated
from the user ID by a '@' character. Realms make it easier to segregate user groups into
independently administered databases, to apply policies on a user group basis, and to
establish roaming agreements to name a few applications. The default realm if not
specified is 'anonymous'. Realm is used with TTLS configurations, and sometimes with
PEAP.
Password
Enter the logon password that the server uses to authenticate to the 802.1x enabled
network. The user ID and password must be in the authentication server database, and is