Sim2 Multimedia HT300 XTRA installation manual On Screen Menus, Source Selection, Main Menu

XTRA

9 ON SCREEN MENUS

SOURCE SELECTION

The Source Selection menu is recalled by pressing the key: 0/AV of the remote control or the Up/Down Arrow key of the keyboard pad. The selected source will be highlighted in yellow. Use Up and Down Arrow keys to browse sources. Right Arrow to select the desired source.

Alternatively, use the remote control to directly select the required source (1 to 8).

Source Selection

1Video

2S-Video

3RGBS 15 kHz

4YCrCb 15 kHz

5RGBS 32 kHz

6YCrCb 32 kHz

7Graphics RGB

8DVI-D

0 RI2 inputs

When using the optional Remote Input Interface press the 0/ AV key twice to display Remote Input Interface sources.

Source Selection / RI2

1Video 1

2Video 2

3S-Video 1

4S-Video 2

5RGBS 15 kHz

6YCrCb 15 kHz

7RGBS 32 kHz

8YCrCb 32 kHz

9Graphics RGB

0 Projector Inputs

When a new source is selected a box appears on the screen with the following indications: selected source, standard vi- deo (for video signals), resolution (for graphic signals) and aspect (Fig. 28).

Video

NTSC/60Hz

Normal

Fig. 28

MAIN MENU

To access the main On Screen Display menu, press the Menu key on the keyboard or the key Menu + or Menu - on the remote control (Fig. 29).

The main menu is divided into four sections to cover various adjustments in a practical and logical manner.

The on-screen menu layout is dependant upon the chosen input signal so various options may not be applicable, i.e. some typical adjustments to the video signal are not applicable to the graphic RGB signals from PC and viceversa.

ZOOM

F1

F2

FOCUS

Fig. 29

15