Sim2 Multimedia HT300 XTRA Picture, Video-Ntsc, Rgb-Dvi, Brightness, Color, Tint, Sharpness

XTRA

PICTURE

This menu features adjustments relating to the projected image quality.

PICTURE
BRIGHTNESS	20
CONTRAST	50
COLOR	50
SHARPNESS	7
FILTER	6
CINEMA MODE	Off	Auto
VIDEO TYPE	Normal	VCR1 VCR2

VIDEO

PICTURE
BRIGHTNESS	20
CONTRAST	50
COLOR	50
TINT	85
SHARPNESS	7
FILTER	6
CINEMA MODE	Off	Auto
VIDEO TYPE	Normal	VCR1 VCR2

VIDEO-NTSC

PICTURE
BRIGHTNESS	50
CONTRAST	20
SHARPNESS	5
SHARPNESS MODE	Video Graphics

RGB-DVI

BRIGHTNESS

Use this control to adjust the image’s black level.

16

COLOR

Use this control to adjust the colour level.

TINT

Controls the purity of the colours, to NTSC coded signal standards. Tint is only applicable to video input with NTSC stan- dard, to RGB 15kHz and YCrCb 15kHz inputs and YCrCb 32kHz (no RI2).

SHARPNESS

Use this adjustment to increase and decrease the level of picture detail.

SHARPNESS MODE

It allows to select the type of processing that determines the detail. In progressive or de-interlaced video signals the Video option is suggested, with graphic signals from a PC the Graphic option is suggested.

FILTER

For video signals it improves the image’s horizontal/vertical definition and sharpness.

CINEMA MODE

In Auto the de-interlacer recognizes if the video signal is originated from a cinematographic film (resulting from Teleciné with 3:2 or 2:2 Pull Down) and applies an interpolation algorithm optimized for this type of signal.

Instead if the video signal does not originate from a cinematographic film, or Off is chosen, the de-interlacer applies

a“Motion Compensated” algorithm optimized for signals coming from a videocamera.

VIDEO TYPE

Inserts a filter that improves stability of images from video- recorders. To toggle between Normal and VCR mode, press the VCR key on the remote control.