XTRA
•Take care not to shake the projector whilst carrying it by the handle.
•Always position the projector away from direct heat sources.
•Do not touch the surface of the projection lens.
•The projector must be positioned on a stable, suitable platform or be installed using a bracket for fixed ceiling or wall installation. Do not rest the projector on the side panels or on the rear panel when in operation.
•Take care to position cables safely, especially in dark places, in order to avoid a trip hazard.
•For installations using a ceiling or
•Please remove batteries from the remote control if not in use for a long period of time.
•A special EVC socket on the projector’s rear panel will allow connection to the optional Remote Input Interface (a special cable is required).
This is not to be confused with a VESA “Plug & Display”. Never connect a computer to this socket, as the projector and the computer may be damaged.
3 PACKAGING AND CONTENTS
1 | 2 | 3 | 4 |
Fig. 5
The carton should contain the following:
-the projector
-the remote control
-four 1.5V AAA batteries (for remote control)
-three power cables (EU, UK, USA)
-the user manual.
To unpack the projector safely and easily please follow steps 1 to 4, as per drawing (Fig. 5).
It is recommended that the carton and packaging is retained for future use and in the unlikely event that your projector needs to be returned for repair.
6
