Touch Screen |
| |
|
|
|
Touch Screen
The touch screen reduces the number of buttons by changing its configuration for each device selected. In this way, the touch screen can provide a total of 768 buttons (16 devices x 2 pages x 24 buttons per page).
Turning the Touch Screen On
Using the touch screen is easy. Simply touch the screen or any hard button to activate it. The
automatically. (To change the programmable power down time, see Power Down Time Period in Chapter 7 – Changing
Figure 5: Touch the Screen To Turn It On
Touch Screen Precautions
Please read the following instructions carefully:
•Tap the LCD touch screen gently; never use force.
•Do not use a pen or any sharp object to tap the screen. You might damage the surface.
•Keep the touch screen dry. Wipe off any spills immediately. The
•Don’t expose the
•Avoid dropping the
•Don’t drop anything on the touch screen.
•Clean the LCD touch screen with a soft cloth. If needed,
dampen the cloth slightly before cleaning. Never use Ch. abrasives or cleaning solutions.
2
Page
| Version number |
Displaying Version Number
For technical support reasons, the Program and Data version numbers might be needed by Sima.
To display the version number, use the VER selection in the SETUP Menu.
1.Press and hold the SETUP button on the Touch Screen for 3 sec. Press each number button (2, 4, 6, 8) until it disappears.
2.Use the arrow buttons on the Touch Screen to select VER (displayed in the upper right corner) and then press the OK button.
Press the OK button again. Use arrow buttons to select PROG. The software version number appears under the PROG menu.
Use the arrows again to select DATA. The data version number appears under the DATA menu.
Press EXIT to exit.
Ch.
6
Page
10 | 51 |