|
|
|
Learning codes |
| |
|
|
|
To learn infrared codes directly from a device’s remote control, follow these steps:
Press and hold the SETUP button on the Touch Screen for 3 seconds.
Press each number button (2, 4, 6, 8) until it disappears.
Use the arrow buttons on the Touch Screen to select LRN and then press the OK button.
Ch.
3
Page
| Deleting devices |
Deleting a Device
If you have an unused or an unwanted device, you may erase the infrared codes for the device and keep the Touch Screen layout , or you
may erase the codes and the Touch Screen layout.
To delete a device from the
Press and hold the DELETE button on the Touch Screen. Press each number button (2, 4, 6, 8) until it disappears. Use the arrow buttons on the Touch Screen to select BANK and then press the OK button.
1.Use the Arrow keys to chose CODE: Erase infrared codes only but keep Touch Screen display the same.
or
ALL: Erase both codes and
Touch Screen layout.
Ch.
3
Page
28 | 33 |
