Sima Products SUR-35 user manual Programming Infrared Codes, Define Macro

Programming SUR-35 User Manual

Programming Infrared Codes

There are two methods you can use to program infrared codes into the SUR-35:

•Using Manufacturer Codes: Use this method to automatically configure all buttons on the SUR-35 for use with a specific manufacturer’s model number. This feature is the fastest way to program the SUR-35 but requires that your device be located in the Manufacturer Code Tables . (Some newer or less common devices may not be pre- programmed and must be learned using the Learning Function.)

•Using the Learning Function: Use this method to directly learn the proper infrared signals from another remote control. The learning eye of the SUR-35 will learn the proper signals to send. This method is perfect for newer or less common devices or if a certain button still not does perform the desired function after using pre-programmed manufacturer codes. However, in rare cases, the SUR-35 may not be able to copy the codes from another remote and it may be necessary to collect unrecognized codes and send them to Sima. (See Collecting Unrecognized Infrared Codes in Chapter 3.)

Ch.

3

Page

SUR-35 User Manual Macros

4.Select a device using the device buttons on the SUR-35. For this example press the TV button.

&4

5.On the Touch Screen select one of the buttons to assign the macro to.

You will hear three beeps. Note: If you select a key that already has a macro assigned to it you will replace the old macro.

Note: You cannot assign a macro to the Quick Channel buttons.

Define Macro		7
6.	Press the TV device button.	%
7.	Press the POWER button.
		6
		&
		Ch.
		5
		Page

22 39