SimpleTech ZeusIOPS manual SCA-2 Interface Connector

SCSI INTERFACE BLOCK

This section provides information on the SCA-2 connector of the ZeusIOPS Fibre Channel SSD.

SCA-2 INTERFACE CONNECTOR

The 3.5-inch SSD is equipped with a 40-pin SCA-2 bus connector. The connector is located on the underside of the drive. DC power and bus traffic is supplied through a non-shielded 40-conductor I/ O cable. Figure 2 shows the location of Pins 1, 20, 21 and 40 relative to the connector housing. See Connector Pinout on page 19.

Figure 2. SCA-2 Interface Connector

34 ZeusIOPS 3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0