SimpleTech ZeusIOPS manual FCP-SCSI Commands, Command Code Command Name

FCP-SCSI COMMANDS

SUPPORTED SCSI COMMANDS

Table 12 summarizes the SCSI commands supported by the ZeusIOPS SSD. Command queuing is supported with all tag types (Head of Queue, Ordered Queue and Simple Queue). A maximum of 256 commands may be queued against each fibre channel port. This section only provides an overview of the SCSI commands supported by the ZeusIOPS SSD. For more information, please consult the

SCSI specification, Fibre Channel Protocol - 3 (FCP-3), Project T10/1560D, ANSI INCITS 416-2006.

NOTE: Linked SCSI commands are not supported. NACA does not apply to the Fibre Channel standard. As a result, all the Control bytes of all the commands are ignored.

Table 12. Supported SCSI Commands

Command Code	Command Name
A0h	Report Luns
00h	Test Unit Ready
08h	Read (6)
0Ah	Write (6)
12h	Inquiry
	Vital Product Data Page (00h)
	Unit Serial Number Page (80h)
	Device Identification Page (83h)
16h	Reserve (6). Obsolete, but supported.
17h	Release (6). Obsolete, but supported.
1Ah	Mode Sense (6)
1Dh	Send Diagnostics Page
4Dh	Log Sense
25h	Read Capacity
28h	Read Extended (10)
2Ah	Write Extended (10)
2Eh	Write and Verify (10)
2Fh	Verify (10)
3Bh	Write Buffer
35h	Synchronize Cache (10)
5Ah	Mode Sense (10)

38 ZeusIOPS 3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0