Singer 9910 instruction manual Automatic BAR-TACK Darning

AUTOMATIC BAR-TACK

AND DARNING

You can sew automatic bar-tack and darning using the buttonhole foot.

No. 59 Bar-tack, to reinforce areas that will be subject to strain, such as pocket corners.

No. 60 Darning, mending and other applications.

Buttonhole Foot
1.	Adjust slide on base according to the length of
	bar-tack or darning.
	a= Length of bar-tack or darning
2.	Pass upper thread through the hole of
	buttonhole foot and bring upper and bobbin
	threads to the left.
3.	Position fabric under presser foot so that the
	starting point comes depth side.
	Lower the foot.
b. Sewing bar-tack on edge of thick fabric such as
	pocket, place same thickness fabric or
	cardboard beside the fabric.
4.	Lower the buttonhole lever completely.
	Note
	Machine will not start to sew if buttonhole lever
	is not lowered properly or buttonhole foot is not
	positioned correctly.
5.	Hold upper thread lightly and start the machine.
6.	Machine will sew bar-tack or daring as shown.
	And machine will stop after sewing taking-end.
7.	Raise the presser foot and cut thread.
64
9910EFSt.pm6		64	2003.9.10, 8:47 PM