Troubleshooting
Symptom | Solution |
|
|
Stiletto 10 does not | Check the battery to be sure it is installed correctly. |
power on | Charge the battery. |
|
|
Stiletto 10 displays: | The Stiletto 10 is searching for a satellite signal. |
Acquiring Signal | Check for obstacles over or around the satellite antenna. |
| Change your location to eliminate nearby obstacles such as build- |
| ings, overhangs, bridges, overpasses, etc. |
|
|
Audio starts and stops | The satellite signal is weak. |
| Check for obstacles over or around the satellite antenna. |
| Change your location to eliminate nearby obstacles such as build- |
| ings, overhangs, bridges, overpasses, etc. |
|
|
No sound | Check that the ear buds or antenna headphones are plugged in |
| correctly and securely. |
|
|
The Stiletto 10 will not | The software on the Stiletto 10 has been damaged. Connect the |
start up or displays | Stiletto 10 to your PC computer using the USB cable, and use |
ERROR | the My Sirius Studio software to download new software to the |
| device. Follow the instructions included on the software |
|
|
The Stiletto 10 does | The Stiletto is locked. Slide the Power/Lock switch to the |
not respond to the | center position. |
Media Dial and other | Slide and hold the Power/Lock switch down for 5 seconds |
buttons | which will turn the Stiletto 10 off. Then slide the Power/Lock |
| switch down and release it. |
| If none of these solutions works, remove the battery, wait 10 |
| seconds, replace the battery, and slide the Power/Lock switch |
| down and release it. |
|
|
