SMC Networks SMC7824M/VSW Installing Electrical Connection, Installing the Electrical Connection

Installation Manual	IMN
TigerAccess™ EE

5.1.3Installing Electrical Connection

According to the network or installation environment, you can use 10/100/1000Base-T in- terface instead of the optical connection. The switch automatically recognizes MDI/MDIX connectors defined in IEEE 802.3.

Fig. 5.3 RJ45 Connector

Use the following procedure when installing an electrical connection.

1.Cut the cables to length.

2.Label and mark the cables.

3.Route and stow the cable in the rack.

4.Install the cables in accordance with your cabling plan.

5.Connect the cable to a suitable electrical port.

Fig. 5.4 describes how to connect the cable to 10/100/1000Base-T interface.

Fig. 5.4 Installing the Electrical Connection

SMC7824M/VSW 29