SMC Networks SMC7824M/VSW 5.2 Connecting VDSL Interface

IMN Installation Manual

TigerAccess™ EE

30 SMC7824M/VSW

5.2 Connecting VDSL Interface

The switch provides 24 VDSL ports as a subscriber interface. To enable broadband ser-

vices to the subscriber, connect the copper cable to the Main Distribution Frame (MDF).

5.2.1 Connecting the System to the Main Distribution Frame

Use this procedure when installing VDSL connections between the system and the MDF.

Use the pre-assembled cables or adjust the cable lengths.

1. Cut the cables to length.

2. Attach the connectors to the cables.

3. Label and mark the cables.

4. Route and stow the cable in the rack.

5. Install the cables in accordance in accordance with your cabling plan.

6. Connect the cables depending on your application.

– If your application is to provide broadband services only, connect the cables to the

VDSL interface on the front panel of the switch and the MDF.

– If your application is to provide broadband and narrowband services, connect the

additional cables between the POTS interface and the PSTN switch.

Fig. 5.5 shows how to connect the cable to VDSL interface.

Fig. 5.5 Connecting the VDSL Interface

Contents

Main Page Warranty and Product Registration Reason for Update Issue History Contents Illustrations Tables 1 Protective Measures 1.1 General Notes 1.2 Protection against Excessive High Contact Voltage 1.3 Protection against Escaping Laser Light 1.4 Protection against Fire in Racks or Housings 1.5 Components Subject to Electrostatic Discharge 1.6 Handling Modules (General) 1.7 Handling Optical Connectors and Fiber Optic Lines 1.8 Rack Mount Instructions 1.9 FCC Registration 1.10 UL Safety Compliance 1.11 Declaration of RoHS Conformity 2 Overview 2.1 Product Specification 2.1.1 System 2.1.2 Functionalities 2.1.3 Physical Specification 2.2 Operating Status LEDs Page 2.3 Items Supplied 3 Setting Up the Rack 3.1 Rack Installation 3.2 Constructing the Rack Page 3.3 Installing the System 3.3.1 Equipping the Rack 3.3.2 Mounting on a Wall Page 3.3.3 Grounding the System 4 Equipping the System 4.1 Installing Uplink Module 5 Cabling the System 5.1 Connecting Uplink Interface 5.1.1 Installing Optical Connection 5.1.2 Installing GE-PON Connection 5.1.3 Installing Electrical Connection 5.2 Connecting VDSL Interface 5.2.1 Connecting the System to the Main Distribution Frame 5.2.2 Connecting Narrowband Services 5.3 Connecting Console Access 5.4 Connecting MGMT Interface 5.5 Connecting Power Supply 6 Appendix A1 Abbreviations IMN Installation Manual TigerAccess EE 36 SMC7824M/VSW A2 Ordering Information Bases Tab. 6.1 Base Options Page FOR TECHNICAL SUPPORT, CALL FOR LITERATURE OR ADVERTISING RESPONSE, CALL: