USING EZSTART
In a Windows 3.x EnvironmentFrom your Windows 3.x desktop,
Note: If multiple cards have been installed, a screen displays each card with its configuration. Select an individual card by
1 Run EZStart as previously described.
2.Select “Custom” from the EZStart main screen.
3.Select “Drivers/Documents” from the “Custom Installation screen.”
4.There are two “Network Drivers and Documentation Selection” screens. Select the appropriate vendor from the first screen. The screen appears again. Select the appropriate driver that you wish to install (make sure the selection you want is highlighted). Then press the Enter key or select “OK.”
5.At the “Network Drivers and Documentation” screen, the default destination directory and a list of files to be copied to the default directory are displayed. To accept the default destination directory, select “Copy Files.” Otherwise, enter a destination directory at the prompt and select “Copy Files.”
6.Follow the prompts to continue the installation.
7.Select “Exit” to exit EZStart.
8.Remove the SuperDisk from the floppy disk drive.