INSTALLING AND CONFIGURING NETWORK DRIVERS
Windows 3.x InstallationWindows for Workgroups v3.1 and v3.11The following section describes how to install Windows for Workgroups v3.1 or v3.11 along with the SMC driver file. If you already have Windows for Workgroups installed and only want to install the SMC driver, proceed to “Installing the SMC Driver Only.”
Installing Windows for Workgroups and the SMC Driver
1.Insert the Windows for Workgroups Disk 1 Setup diskette in your computer's disk drive.
2.Change to the drive where you inserted the disk in Step 1. Then, at the DOS prompt, type: “SETUP.”
3.Press the “Enter” key to start the setup procedure. Typically, this procedure takes from 10 to 15 minutes.
4.Follow the screen prompts until the “Network Setup” window appears. Select “Networks” and “Install Microsoft Windows Network.” Select “No additional network” or “Other,” as necessary. Click on “OK.” Refer to your Windows for Workgroups manual for information.
5.Select “Sharing” and specify whether you want other users to be able to share your files and printer(s). Then select “OK.”
6.Click on the “Driver” button and then on the “Add Adapter” button.
7.Select “Unlisted or Updated Network Adapter” followed by “OK.”
8.When the “Install Driver” window appears, insert the SuperDisk into your computer's disk drive. Type the path where the driver resides (A:\WFW).