SMC Networks SMC9432TX Running EZStart, In a DOS Environment

USING EZSTART

6.For the Command Line entry, type the complete path to the SuperDisk files and then type “EZSTART.EXE.” For example:

C:\> SMC\EZSTART.EXE

Note: You can use the EZSTART.PIF file instead of EZSTART.EXE for more control over the environment in which EZStart loads. For more information on working with .PIF files, refer to the Microsoft Windows documentation.

7.Select “Change Icon.”

8.Select “OK.”

9.Select “Browse” and then select the directory containing the EZStart utility.

10.Select the “EZSTART.ICO” file to install the icon on your Windows desktop.

11.Select “OK” with each window, until you return to your Windows desktop.

Running EZStartIn a DOS Environment

1.To run EZStart from the SuperDisk, insert the SuperDisk in a drive, select that drive, type “EZSTART,” and press the Enter key. For example:

C:\> A: <Enter>

A:\> EZSTART <Enter>

2.To run EZStart from the hard disk, change to the directory on the hard disk containing the SuperDisk files, type “EZSTART,” and press Enter. For example:

C:\> CD SMC <Enter>

C:\SMC> EZSTART <Enter>

D-4