TESTING THE NETWORK CARD
Setting Up a Responder1.Run EZStart.
2.Select “Custom” from the EZStart main screen.
3.Select “Two Node.” The
4.Select “Responder.” The “Respond To Test Messages” screen appears.
The computer is ready to receive and retransmit messages. The numbers in the “Frames Received” and “Frames Transmitted” fields will be dynamically updated once the “Initiator” begins the test.
Note: Repeat this procedure for all computers you wish to set up as Responders.
Setting Up an Initiator1.Run EZStart.
2.Select “Custom” from the EZStart main screen.
3.Select “Two Node.”
4.Select “Initiator.” The “Initiate Test Messages” screen appears.
Note: You can configure several Initiators, which can all send frames to a single Responder.
Running the Test1.From the “Initiate Test Messages” screen, use one of the following procedures to select a Responder.
K Select “Find Responder” to have EZStart choose the first Responder it finds. (Skip ahead to Step 2.)