INSTALLING AND CONFIGURING NETWORK DRIVERS

If you installed the driver using EZStart and did not edit your AUTOEXEC.BAT file to call STARTNET.BAT, see ”Using STARTNET.BAT” below.

This completes the driver-loading procedure. Refer to the Novell NetWare ODI Shell for DOS manual for further details about running a DOS VLM client.

Using STARTNET.BAT

If you do not use EZdosodi or EZStart's “Automatic Novell DOS ODI” installation procedure to automatically modify your AUTOEXEC.BAT file to call STARTNET.BAT upon reboot, you can modify it yourself, as shown below:

REM

Change directory to DOS ODI driver

REM

files.

 

CD

\NWCLIENT

 

 

REM

Load

network

software.

STARTNET

 

 

REM

This

batch file, STARTNET.BAT,loads

REM

the DOS ODI driver and Novell

REM

network shell

program.

If you do not use the STARTNET.BAT file as described above, use the following loading sequence to connect to a server:

LSL.COM

SMCPWR2.COM

IPXODI.COM

VLM.EXE

NET.CFG Keywords

NET.CFG keywords are described in the DOS ODI VLM Client driver installation document on the SMC SuperDisk.

3-12