Wireless USB 2.0 Adapter
The following table describes the items found on the Advanced Status screen.
|
|
|
Network Name (SSID) |
| Displays the wireless network name. |
|
| Configure the network name by clicking New or Modify on the |
|
| Profile Management tab. |
|
|
|
Server Based |
| Shows whether |
Authentication |
|
|
|
|
|
|
|
|
Data Encryption |
| Displays the encryption type the driver is using. Configure the |
|
| encryption type by clicking New or Modify on the Profile |
|
| Management tab on the Security tab. |
|
|
|
Authentication Type |
| Displays the authentication mode. |
|
| Configure the authentication mode by clicking New or Modify on |
|
| the Profile Management tab. |
|
|
|
Message Integrity |
| Shows whether MIC is enabled. MIC prevents |
Check |
| encrypted packets. |
|
|
|
Associated AP Name |
| Displays the name of the access point the wireless adapter is |
|
| associated to. |
|
|
|
Associated AP IP |
| Shows the IP address of the access point the wireless adapter is |
Address |
| associated to. |
|
|
|
Associated AP MAC |
| Displays the MAC address of the access point the wireless adapter |
Address |
| is associated to. |
| ||
Power Save Mode |
| Shows the power save mode. Power management is disabled in |
|
| ad hoc mode. |
|
| Configure the power save mode on the Advanced tab by clicking |
|
| Modify. |
|
|
|
Current Power Level |
| Displays the transmit power level rate in mW. |
|
| Configure the transmit power level on the Advanced tab by |
|
| clicking Modify. |
|
|
|
Available Power |
| Shows the 802.11a and/or 802.11b/g available power levels. |
Levels |
|
|
|
|
|
Current Signal |
| Shows the current signal strength in dBm. |
Strength |
|
|
|
|
|
Current Noise Level |
| Displays the current noise level in dBm. |
| ||
Up Time |
| Shows how long the client adapter has been receiving power (in |
|
| hours:minutes:seconds). If the adapter runs for more than 24 |
|
| hours, the display shows in days:hours:minutes:seconds. |
|
|
|
802.11b Preamble |
| Displays the 802.11b preamble format. |
|
| Configure the preamble format on the Advanced tab by clicking |
|
| Modify. |
|
|
|
Current Receive Rate |
| Shows the current receive rate in Mbps. |
|
|
|
Current Transmit Rate |
| Displays the current transmit rate in Mbps. |
|
|
|
Channel |
| Shows the currently connected channel. |
|
|
|
Frequency |
| Displays frequency the station is using. |
|
|
|
Channel Set |
| Shows the current channel set. |
|
|
|
18
