Smeg CS122-6 manual Cleaning the ovens without self-cleaning liners, The plugs and thermocouples

Models: CS122-6

1 37
Download 37 pages 45.23 Kb
Page 32
Image 32
11.2.5 The plugs and thermocouples

Instructions for the User

11.2.4The burner caps, flame diffuser rings and burners The burner caps and flame diffuser rings can be

removed for easier cleaning; wash them in hot water and non-abrasive detergent, taking care to remove all deposits, and wait for them to dry completely.

Replace the burner caps on their rings, making sure that the holes A are perfectly centered with the circular projections B on the burners.

Never wash these components in the dishwasher.

11.2.5 The plugs and thermocouples

For best performance, the ignition plugs and thermocouples must always be kept thoroughly clean. Check them frequently and if necessary clean them with a wet cloth. Remove any dry residues with a wooden toothpick or a needle.

11.3 Cleaning the ovens (without self-cleaning liners)

To keep the ovens in good condition, they must be cleaned regularly, after allowing them to cool down. Remove all removable parts.

Remove the side runners by lifting them at the front and extracting them from the hole at the back.

Clean the oven shelves and side runners with hot water and non- abrasive detergents, rinse and dry.

74

Page 32
Image 32
Smeg CS122-6 manual Cleaning the ovens without self-cleaning liners, The plugs and thermocouples, Instructions for the User