Final Operations, Fitting the rear splash-back | Smeg CS122-6

Instructions for the Installer

4.FINAL OPERATIONS

After changing the nozzles, put the pan stands, the burner caps and flame diffuser rings back in place.

After adjusting for use of a gas other than the gas used for testing the appliance, replace the gas setting label on the appliance with the label for the new gas. The label is supplied in the bag with the nozzles.

4.1 Adjusting the minimum setting for town gas and natural gas

Light the burner and turn it to the minimum setting Remove the gas tap knob and adjust the regulator screw inside or beside the tap rod (depending on the model) until an even minimum flame is obtained. Put the knob back in place and check the stability of the burner flame (the flame must not go out when the knob is turned quickly from the maximum to the minimum setting). Repeat the operation on all the gas taps.

4.2 Adjusting the minimum for bottled gas

To adjust the minimum level when using bottled gas, the adjuster screw inside or beside the tap rod must be turned fully clockwise (depending on the models).

The diameters of the bypasses for each individual burner are stated in point "3.2 Burner and Nozzle Data Tables".

4.3Fitting the rear splash-back

•Place the splash-back on the hob, aligning the holes A with the holes B.

•Fix the splash-back to the hob by tightening the screws C.

51

Image 9

Smeg CS122-6 Final Operations, Adjusting the minimum setting for town gas and natural gas, Fitting the rear splash-back

Contents

Table of Contents Presentation Precautions for Safety and USE Nameplate Must Never be Removed Positioning and levelling the appliance Installing the Appliance This nameplate must never be removed Electrical connection 4Connecting to natural and LPG gas Please see connection Ventilation requirementsInstruction for wall fixing only on some models Changing nozzles Adaptation to Different Types of GAS Hob burner layout Burner and nozzle characteristics tableLPG G30/G31 28/37 mbar Natural GAS G20 20 mbar Adjusting the minimum for bottled gas Adjusting the minimum setting for town gas and natural gasFinal Operations Fitting the rear splash-back Description of Controls Front panelLEFT-HAND Oven Thermostat Knob Barbecue Element Power Regulator Knob LEFT-HAND Oven Function Selector KnobHOB Burner Control Knob Right Oven Timer Knob RIGHT-HAND Oven Thermostat KnobRIGHT-HAND Oven Function Selector Knob Setting the time Electronic Analogue ClockList of Functions Minute-Minder Programming Demo Function Lighting the hob burners Using the HOB Practical hints for using the hob burners Using the barbecue griddlePan diameters Precautions and General Advice Using the OvensOven light Cooling fan system Precautions for using the pizza plate Using the Pizza Function To save energy Accessories Available Optional accessories Conventional cooking left/right oven Cooking Advice Hot air cooking left-hand oven Function Selector Thermostat AT Maximum SettingGrilling left/right oven Function Selector Thermostat SET AT 50 250C Hot-air grilling left/right oven Defrosting left-hand ovenFunction Selector Thermostat SET on Function Selector Thermostat SET AT 50 -200C Rotisserie cooking left-hand oven Recommended cooking tables Conventional Cooking HOT-AIR Cooking Cleaning stainless steel Cleaning and MaintenanceRoutine daily cleaning Food stains or spills Barbecue griddle plate Cleaning the hob componentsBasin Pan stands Plugs and thermocouples Cleaning the ovens without self-cleaning liners Maintenance of self-cleaning liners Using the self-cleaning linersRemoving the self-cleaning liners Oven liners Cleaning the oven bottom right-hand oven Door glazingPizza plate must be washed separately Instructions for the User Changing the light bulbs Extraordinary Maintenance Removing the door Oven door gasketsGreasing the gas taps