Once draining has been completed the machine goes into standby, indicated by the appearance of dashes
“upon the display. Turn the machine back on by
pressing 
and afterwards press the 
button. The regeneration cycle starts and moving dashes appear on the display; after 20 minutes the regeneration cycle ends and the machine goes into standby. Open the door, insert the overflow into the Tank and turn off the main wall switch.
During the execution of the regeneration cycle it will not be possible to perform any operations. It must always be done with the Tank empty.
Refilling the supply of regenerating salt (for models equipped with water softeners)
The refill is to be performed once the insufficient salt indicator appears on the display ( 
).
Perform the salt refill when there is no water in the Tank in order to keep wash water from entering the water softener device.
Caution: Use only specific salt. Do not use table salt.
The salt tank has a capacity of about 1 kg of granulated salt.
The tank is situated at the bottom of the Tank. After having extracted the basket, unscrew the cap and pour the salt through the provided funnel. Before screwing the cap back in place remove any eventual salt residues in proximity to the opening.
8.5Total drainage at the end of the day
The dishwasher is capable of performing an
After having removed the overflow from the Tank, keep the 
button pressed for 3 seconds to initiate the emptying of the Tank and boiler. The boiler door must be closed while that of the Tank is to remain open. This will inhibit water from loading and, after the Pressostat’s Tank empty signal is given, will only allow a limited amount of water from the boiler to circulate in order to facilitate the cleaning of the Tank.
At the end of the function the machine goes into standby, indicated by the appearance of dashes 
button. If the machine is equipped with the drain pump option, the drain pump will activate as well.
Do not turn off the washing machine while the Tank is full. Always drain it first.
13
