The wood and cardboard components can be disposed of by respecting the norms in vigor.

When disposing of the product, avoid leaving it in the environment; its disposal must respect the norms in vigor. All of the metallic parts are in stainless steel and are detachable.

The plastic parts are marked with the symbol of the relative material.

POSITIONING:

Warning: the internal system and the locations in which communal apparatus are to be installed, must answer to the norms in vigor.

The manufacturer declines any responsibility for direct damages to persons of things deriving from lack of respect for the said norms.

Prior to installation verify that objects and materials which could be damaged by aqueous vapor or by spray from washing solutions are not in the vicinity, or are adequately protected.

Position the dishwasher in the desired position and remove the protective wrapping.

Level the dishwasher (with the help of a level) on its four feet, regulating them in such a way so as to guarantee stability; any alternate solution must be approved by the manufacturer.

4INSTALLER – TECHNICAL ASSISTANT INSTRUCTIONS

Water and drain connection:

The water tubes and the electrical power cable stick out from the back of the machine. Connect the water supply tube to a ¾” threaded gas outlet.

Use only new tubes for the connection to the water supply; old or used tubes must not be utilized.

The dynamic supply pressure must be between 2 and 4 bar; if the pressure is higher, a pressure reducer must be installed.

It is indispensable to install a general faucet on the supply water input tubing; the faucet must be accessible after installation has been completed. Do not install the faucet behind the dishwasher.

The declared cycle durations refer to a 50° hot water supply.

Where a cold water supply is used, the duration of the cycle could increase in relation to the input water temperature since the dishwasher is equipped with a constant temperature and pressure rinse system.

Drain:

Every dishwasher comes equipped with a drain connection tube; this is prescribed to be at floor level, with a trap drain.

Caution: make sure that the supply and drain tubes are not bent, restricted or crushed after installation.

4.1 Electrical connection

The dishwasher’s electrical connection and that of eventual supplementary apparatus is to be entrusted to authorized and qualified personnel, with respect to the norms in vigor; observe also the technical regulations for the connections.

The total power installed is given upon the apparatus’ technical data label. Other apparatus must not be protected along with the dishwasher.

The user must provide for the installation, according to the norms in vigor, of a main electrical power switch and of a differential switch compatible with the machine’s characteristics.

These switches must be installed near the dishwasher, be easily accessible after installation and guarantee complete disconnection from the electrical supply in category III overvoltage conditions.

Caution!!!

The dishwasher is free of electrical current only when the main switch is off.

‐Connect the apparatus to the usage equalizer. The clamp for the connection is located at the lower

4

Page 4 Page 6
Page 5
Image 5
Smeg CW350SD Installer Technical Assistant Instructions, Positioning, Electrical connection, Water and drain connection
Page 4 Page 6

CW350BSD, CW350B, CW350BS, CW400B, CW350S specifications

The Smeg CW400RSD, CW400RS, CW400BSD, CW400R, and CW400BS are part of Smeg’s innovative range of built-in coffee machines that seamlessly combine aesthetics, performance, and advanced coffee brewing technology. Smeg, an Italian brand known for its retro-inspired design, has ensured that these machines not only perform exceptionally but also add a touch of elegance to any kitchen.

One of the standout features of these models is their intuitive touch control interface, which provides a user-friendly experience. The LED display offers clear visibility of the settings, making it easy to choose from the numerous coffee beverages available, including espresso, cappuccino, and latte macchiato. Users can customize their drinks by adjusting the strength and volume, catering to personal taste preferences.

These coffee machines are equipped with a powerful coffee grinder, allowing for fresh bean grinding, which is crucial for achieving rich and aromatic coffee. The adjustable grind settings enable users to choose their desired coarseness, ensuring optimal extraction and flavor. Additionally, the machines come with a convenient bypass doser, allowing for the use of pre-ground coffee when needed.

Another notable characteristic is the milk frothing system. The CW400 series integrates a unique milk frother that allows users to create creamy textures for their milk-based drinks. This feature is essential for achieving the perfect cappuccino or flat white, emphasizing Smeg's commitment to delivering café-quality beverages at home.

The design of the CW400 series cannot be overlooked. With options featuring vibrant colors and a sleek, modern design, these machines not only serve as coffee makers but also as style statements in the kitchen. Their compact dimensions make them ideal for various kitchen layouts, fitting seamlessly into any space.

In terms of maintenance, Smeg has incorporated user-friendly cleaning systems, including automatic cleaning cycles and removable components for easy washing. The machines also have a water reservoir that can be easily accessed and refilled, ensuring hassle-free usage.

Overall, the Smeg CW400RSD, CW400RS, CW400BSD, CW400R, and CW400BS offer a blend of modern technology and classic design, making them a perfect addition for coffee aficionados and casual drinkers alike. Their advanced features, customizable options, and elegant aesthetic elevate the coffee-making experience, making every cup a delight.
Top Page Image Contents