Smeg CW350SD, CW400RSD manual Total drainage at the end of the day models, Equipped with drain pump

Confirm the initiation of the program by pressing	.
While the cycle is running the selected program’s led
indicator will flash;

Once the selected program has finished its led indicator

will stop flashing and will remain on. The	led
indicator starts flashing.
Remove the basket

If the door is opened with the wash cycle running the program stops and resets itself. Once the door has been

closed again press the	button to restart the cycle.
		Total drainage at the end of the day (models
		equipped with drain pump)
		After having removed the overflow from the basin, close
		the door and press the		button to select the option.
		The led indicator turns on and the			LED indicator
		flashes.
		Press	for 2 seconds to initiate the emptying of the
		basin and the boiler with the door closed. The drain led
		indicator	starts flashing.
		At the end of the function the machine goes into
		standby and the drain led indicator stops flashing and
		remains on.
		To render the machine operational again it is therefore
		necessary to insert the overflow and to push the
		button.
		Total drainage at the end of the day (models not
		equipped with drain pump)
		Shut off the machine		, open the door, remove the
		overflow and wait until the basin has been drained.
		Insert the overflow and close the door again.

16