Smeg CW350 manual Maintenance and Cleaning, Daily cleaning, Cleaning of the filter during the day

Models: CW350BSD CW350B CW350BS CW400B CW350S CW350 CW350SD CW400BS CW400R CW400BSD CW400RS CW400RSD

1 33
Download 33 pages 50.48 Kb
Page 18
Image 18

Regeneration cycle (for models equipped with water softeners)

For models equipped with drain pumps, perform a drain cycle before executing the regeneration cycle.

For models not equipped with drain pumps, remove the overflow and close the door.

Press the button to select the option. The led

indicator turns on and the led indicator flashes.

Hold down the button for two seconds to initiate the regeneration cycle. During the regeneration cycle the

and led indicators flash.

If the door is opened at any time the regeneration cycle stops along with any filling operations. When the door is closed again the cycle starts from where it left off.

After 20 minutes the regeneration cycle finishes and the

machine remains in standby with the and led indicators steadily on.

Open the door, insert the overflow into the basin and turn off the main wall switch.

During the execution of the regeneration cycle it will not be possible to perform any operations.

Refilling the supply of regenerating salt (for models equipped with water softeners)

Perform the salt refill when there is no water in the basin in order to keep wash water from entering the water softener device.

Caution: Use only specific salt. Do not use table salt.

The salt tank has a capacity of about 1 kg of granulated salt.

The tank is situated at the bottom of the basin. After having extracted the basket, unscrew the cap and pour the salt through the provided funnel. Before screwing the cap back in place remove any eventual salt residues in proximity to the opening.

Once having finished using the machine, and after having performed the final draining and eventual

regeneration, shut off the machine by pressing the button and turn off the wall switch.

10 MAINTENANCE AND CLEANING

Notwithstanding that special, programmed maintenance is not required, we recommend having the dishwasher checked by a specialized technician twice a year.

Note: intentional damage or that derived from carelessness, negligence, lack of respect for the regulations, instructions and norms or erred connections are not to be considered the responsibility of the manufacturer.

10.1 Daily cleaning

The dishwasher has an IPX4 protection rating, but the use of direct streams of water for its cleaning is forbidden.

Cleaning of the filter during the day

17

Page 18
Image 18
Smeg CW400RSD, CW400BSD, CW350SD, CW350BS Maintenance and Cleaning, Daily cleaning, Cleaning of the filter during the day