Instructions for the User
7.6.1 Child safety lock-out function
With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. Now press PT1 until the message «OFF BLOC» appears on DPS1.
Turn PT1 to the right or left to activate (ON BLOC) or deactivate (OFF BLOC) this function, which locks out all the functions and knobs after 2 minutes of operation without any command from the user (when this system is active, the 
symbol appears on DPS2).
After setting the parameter required, press PT2 to return the oven to the initial standby status.
To exit the lockout status temporarily to modify a cooking program or
select a different function, keep PT1 pressed until the 
symbol disappears from DSP2. The required changes can now be made, and 2 minutes after the last setting is made the lockout will come into operation again.
To deactivate the lockout permanently, access the secondary menu and switch the function off as described in this section.
7.6.2 Show Room Function
With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. This means that the SHOW ROOM function (which disables all the heating elements so that only the control panel works) is not active.
Turn PT1 to the right or left to activate (ON SHO) or deactivate (OFF SHO) this function. To use the oven normally, set OFF SHO.
After setting the parameter required, press PT2 to return the oven to the initial standby status.
7.6.3 Power selection function
With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. Now press PT1 once again and the message «OFF 2300» will appear on DPS1.
Turn PT1 to the right or left to activate (ON 2300) or deactivate (OFF 2300) this function, which limits the oven's maximum power absorption, in any function, to 2300 W.
After setting the parameter required, press PT2 to return the oven to the initial standby status.
47
