Manuals / Brands / Computer Equipment / Switch / SMSC / Computer Equipment / Switch

SMSC USB2640, USB2640i 7.3.3.14E1h: Product ID (MSB), 7.3.3.15E2h: Device ID (LSB), 7.3.3.16E3h: Device ID (MSB), 7.3.3.17E4h: Config Data Byte 1 (CFG_DAT_BYT1)

1 60

Download 60 pages, 1.11 Mb

Ultra Fast USB 2.0 Multi-Format Flash Media Controller/USB Hub Combo

7.3.3.14E1h: Product ID (MSB)

BIT
NUMBER	BIT NAME	DESCRIPTION

7:0	PID_MSB	Most Significant Byte of the Product ID. This is a 16-bit value that the Vendor
		can assign that uniquely identifies this particular product.

7.3.3.15E2h: Device ID (LSB)

BIT
NUMBER	BIT NAME	DESCRIPTION

7:0	DID_LSB	Least Significant Byte of the Device ID. This is a 16-bit device release
		number in BCD (binary coded decimal) format.

7.3.3.16E3h: Device ID (MSB)

BIT
NUMBER	BIT NAME	DESCRIPTION

7:0	DID_MSB	Most Significant Byte of the Device ID. This is a 16-bit device release
		number in BCD format.

7.3.3.17E4h: Config Data Byte 1 (CFG_DAT_BYT1)

BIT
NUMBER	BIT NAME	DESCRIPTION

7	SELF_BUS_PWR	Self- or Bus-Power: Selects between Self- and Bus-Powered operation.
		The hub is either Self-Powered (draws less than 2 mA of upstream bus
		power) or Bus-Powered (limited to a 100 mA maximum of upstream power
		prior to being configured by the host controller).
		When configured as a Bus-Powered device, the SMSC hub consumes less
		than 100 mA of current prior to being configured. After configuration, the
		Bus-Powered SMSC hub (along with all associated hub circuitry, any
		embedded devices if part of a compound device, and 100 mA per externally
		available downstream port) must consume no more than 500 mA of
		upstream VBUS current. The current consumption is system dependent, and
		the OEM must ensure that the USB 2.0 specifications are not violated.
		When configured as a Self-Powered device, <1 mA of upstream VBUS
		current is consumed and all ports are available, with each port being capable
		of sourcing 500 mA of current.
		0 = Bus-Powered operation
		1 = Self-Powered operation

6	Reserved	Always reads ‘0’.

SMSC USB2640/USB2641	37	Revision 2.0 (10-03-08)
	DATASHEET

Contents

USB2640/USB2641 Ultra Fast USB 2.0 Multi-Format Flash Media Controller/USB Hub Combo Datasheet Page Table of Contents Page List of Tables List of Figures Chapter 1 Overview 1.1Device Features 1.2OEM Selectable Features Chapter 2 Acronyms Chapter 3 Pin Configurations Figure 3.2 USB2641 48-PinQFN Chapter 4 Pin Tables 4.148-PinTables Table 4.2 USB2641 48-PinTable SECURE DIGITAL / MEMORY STICKINTERFACE (14 PINS) DIGITAL POWER, NO CONNECTS (9 PINS) Diagrams Block 5 Chapter Page Chapter 6 Pin Descriptions 6.1USB2640/USB2641 Pin Descriptions Table 6.1 USB2640/USB2641 Pin Descriptions (continued) MEMORY STICK INTERFACE SECURE DIGITAL / MULTIMEDIACARD INTERFACE USB INTERFACE Note: SPI INTERFACE Page MISC DIGITAL / POWER / GROUND 6.2Buffer Type Descriptions 6.3Port Power Control USB2640 USB2641 6.4ROM BOOT Sequence Chapter 7 Configuration Options 7.1Hub 7.1.1.1Power Switching Polarity 7.2Card Reader 7.3System Configurations 7.3.2EEPROM Data Descriptor Table Internal Flash Media Controller Configurations REG ADDR REGISTER NAME Table 7.1 Internal Flash Media Controller Configurations (continued) Table 7.2 Hub Controller Configurations 7.3.2.10h-19h:USB Serial Number Option 7.3.2.21Ah-1Bh:USB Vendor ID Option 7.3.2.31Ch-1Dh:USB Product ID Option 7.3.2.41Eh-21h:USB Language Identifier Option 7.3.2.522h-5Dh:USB Manufacturer String Length 7.3.2.65Eh-99h:USB Product String Length 7.3.2.79Ah: USB BmAttribute (1 byte) 7.3.2.89Bh: USB MaxPower (1 byte) 7.3.2.99Ch-9Fh:Attribute Byte Descriptions 7.3.2.10A4h-A5h:LUN Power Configuration 7.3.2.11A8h: LED Blink Interval (1 byte) 7.3.2.12A9h: Blink Duration (1 byte) 7.3.3.1AAh-B0h:Lun 0 Identifier String 7.3.3.2B1h-B7h:Lun 1 Identifier String 7.3.3.3B8h-BEh:Lun 2 Identifier String 7.3.3.4BFh-C5h:Lun 3 Identifier String 7.3.3.5C6h-CDh:Inquiry Vendor String 7.3.3.6CEh-D2h:Inquiry Product String 7.3.3.7D3h: Dynamic Number of Luns 7.3.3.8D4h-D7h:Lun to Device Mapping 7.3.3.9D8h-DAh:Reserved 7.3.3.10DBh-DDh:Reserved 7.3.3.11DEh: Vendor ID (LSB) 7.3.3.12DFh: Vendor ID (MSB) 7.3.3.13E0h: Product ID (LSB) 7.3.3.14E1h: Product ID (MSB) 7.3.3.15E2h: Device ID (LSB) 7.3.3.16E3h: Device ID (MSB) 7.3.3.17E4h: Config Data Byte 1 (CFG_DAT_BYT1) 7.3.3.18E5h: Config Data Byte 2 (CFG_DAT_BYT2) 7.3.3.19E6h: Config Data Byte 3 (CFG_DAT_BYT3) 7.3.3.20E7h: Non-RemovableDevice 7.3.3.21E8h: Port Disable For Self-PoweredOperation 7.3.3.22E9h: Port Disable For Bus-PoweredOperation 7.3.3.23EAh: Max Power For Self-PoweredOperation 7.3.3.24EBh: Max Power For Bus-PoweredOperation 7.3.3.25ECh: Hub Controller Max Current For Self-PoweredOperation 7.3.3.26EDh: Hub Controller Max Current For Bus-PoweredOperation 7.3.3.27EEh: Power-OnTime 7.3.3.28EFh: Boost_Up 7.3.3.29F0h: Boost_3:0 7.3.3.30F1h: Port Swap 7.3.3.31F2h: Port Remap 7.3.3.32F3h: Port Remap 7.3.3.33F4h: MS/SD Clock Limit 7.3.3.34F5h: Reserved 7.3.3.35F6h: Reserved FCh-FFh: 7.3.4.1Implementation Characteristics 7.4Default Configuration Option: 7.5Reset 7.5.2.1RESET_N for EEPROM Configuration Chapter 8 Pin Reset States 8.1Pin Reset States Table 8.2 USB2640 Pin Reset States (continued) Table 8.3 USB2641 Pin Reset States Table 8.3 USB2641 Pin Reset States (continued) Chapter 9 DC Parameters 9.1Maximum Guaranteed Ratings 9.2Operating Conditions 9.3DC Electrical Characteristics Input Leakage O12 Type Buffer I/O12, I/O12PU & I/O12PD Type Buffer IO-U 9.4Capacitance Chapter 10 AC Specifications 10.1Oscillator/Clock (C1 + CS1) x (C2 + CS2) CL (C1 + CS1 + C2 + CS2) Chapter 11 Package Outline Chapter 12 GPIO Usage