Manuals / Brands / Computer Equipment / Switch / SMSC / Computer Equipment / Switch

SMSC USB2640, USB2640i 7.3.3.20E7h: Non-RemovableDevice, 7.3.3.21E8h: Port Disable For Self-PoweredOperation

1 60

Download 60 pages, 1.11 Mb

Ultra Fast USB 2.0 Multi-Format Flash Media Controller/USB Hub Combo

7.3.3.20E7h: Non-Removable Device

BIT
NUMBER	BYTE NAME	DESCRIPTION

7:0	NR_DEVICE	Non-removable Device: Indicates which port(s) include non-removable
		devices. ‘0’ = port is removable, ‘1’ = port is non-removable.
		Informs the host if one of the active ports has a permanent device that is
		undetachable from the hub. (Note: The device must provide its own
		descriptor data.)
		When using the internal default option, the NON_REM[1:0] pins will
		designate the appropriate ports as being non-removable.
		Bit 7= Reserved
		Bit 6= Reserved
		Bit 5= Reserved
		Bit 4= Reserved
		Bit 3= 1; port 3 non-removable
		Bit 2= 1; Port 2 non-removable
		Bit 1= 1; Port 1 non removable
		Bit 0= Reserved, always = ‘0’
		Note: Bit 1 must be set to a ‘1’ by the firmware for proper identification of
		the card reader as a non-removable device.

7.3.3.21E8h: Port Disable For Self-Powered Operation

BIT
NUMBER	BYTE NAME	DESCRIPTION

7:0	PORT_DIS_SP	Port Disable Self-Powered: Disables 1 or more ports. ‘0’ = port is available,
		‘1’ = port is disabled.
		During Self-Powered operation this register selects the ports which will be
		permanently disabled. The ports are unavailable to be enabled or
		enumerated by a Host Controller. The ports can be disabled in any order
		since the internal logic will automatically report the correct number of
		enabled ports to the USB host and will reorder the active ports in order to
		ensure proper function.
		Bit 7= Reserved
		Bit 6= Reserved
		Bit 5= Reserved
		Bit 4= Reserved
		Bit 3= 1; Port 3 is disabled
		Bit 2= 1; Port 2 is disabled
		Bit 1= 1; Port 1 is disabled
		Bit 0= Reserved, always = ‘0’

Revision 2.0 (10-03-08)	40	SMSC USB2640/USB2641
	DATASHEET

Contents

USB2640/USB2641 Ultra Fast USB 2.0 Multi-Format Flash Media Controller/USB Hub Combo Datasheet Page Table of Contents Page List of Tables List of Figures Chapter 1 Overview 1.1Device Features 1.2OEM Selectable Features Chapter 2 Acronyms Chapter 3 Pin Configurations Figure 3.2 USB2641 48-PinQFN Chapter 4 Pin Tables 4.148-PinTables Table 4.2 USB2641 48-PinTable SECURE DIGITAL / MEMORY STICKINTERFACE (14 PINS) DIGITAL POWER, NO CONNECTS (9 PINS) Diagrams Block 5 Chapter Page Chapter 6 Pin Descriptions 6.1USB2640/USB2641 Pin Descriptions Table 6.1 USB2640/USB2641 Pin Descriptions (continued) MEMORY STICK INTERFACE SECURE DIGITAL / MULTIMEDIACARD INTERFACE USB INTERFACE Note: SPI INTERFACE Page MISC DIGITAL / POWER / GROUND 6.2Buffer Type Descriptions 6.3Port Power Control USB2640 USB2641 6.4ROM BOOT Sequence Chapter 7 Configuration Options 7.1Hub 7.1.1.1Power Switching Polarity 7.2Card Reader 7.3System Configurations 7.3.2EEPROM Data Descriptor Table Internal Flash Media Controller Configurations REG ADDR REGISTER NAME Table 7.1 Internal Flash Media Controller Configurations (continued) Table 7.2 Hub Controller Configurations 7.3.2.10h-19h:USB Serial Number Option 7.3.2.21Ah-1Bh:USB Vendor ID Option 7.3.2.31Ch-1Dh:USB Product ID Option 7.3.2.41Eh-21h:USB Language Identifier Option 7.3.2.522h-5Dh:USB Manufacturer String Length 7.3.2.65Eh-99h:USB Product String Length 7.3.2.79Ah: USB BmAttribute (1 byte) 7.3.2.89Bh: USB MaxPower (1 byte) 7.3.2.99Ch-9Fh:Attribute Byte Descriptions 7.3.2.10A4h-A5h:LUN Power Configuration 7.3.2.11A8h: LED Blink Interval (1 byte) 7.3.2.12A9h: Blink Duration (1 byte) 7.3.3.1AAh-B0h:Lun 0 Identifier String 7.3.3.2B1h-B7h:Lun 1 Identifier String 7.3.3.3B8h-BEh:Lun 2 Identifier String 7.3.3.4BFh-C5h:Lun 3 Identifier String 7.3.3.5C6h-CDh:Inquiry Vendor String 7.3.3.6CEh-D2h:Inquiry Product String 7.3.3.7D3h: Dynamic Number of Luns 7.3.3.8D4h-D7h:Lun to Device Mapping 7.3.3.9D8h-DAh:Reserved 7.3.3.10DBh-DDh:Reserved 7.3.3.11DEh: Vendor ID (LSB) 7.3.3.12DFh: Vendor ID (MSB) 7.3.3.13E0h: Product ID (LSB) 7.3.3.14E1h: Product ID (MSB) 7.3.3.15E2h: Device ID (LSB) 7.3.3.16E3h: Device ID (MSB) 7.3.3.17E4h: Config Data Byte 1 (CFG_DAT_BYT1) 7.3.3.18E5h: Config Data Byte 2 (CFG_DAT_BYT2) 7.3.3.19E6h: Config Data Byte 3 (CFG_DAT_BYT3) 7.3.3.20E7h: Non-RemovableDevice 7.3.3.21E8h: Port Disable For Self-PoweredOperation 7.3.3.22E9h: Port Disable For Bus-PoweredOperation 7.3.3.23EAh: Max Power For Self-PoweredOperation 7.3.3.24EBh: Max Power For Bus-PoweredOperation 7.3.3.25ECh: Hub Controller Max Current For Self-PoweredOperation 7.3.3.26EDh: Hub Controller Max Current For Bus-PoweredOperation 7.3.3.27EEh: Power-OnTime 7.3.3.28EFh: Boost_Up 7.3.3.29F0h: Boost_3:0 7.3.3.30F1h: Port Swap 7.3.3.31F2h: Port Remap 7.3.3.32F3h: Port Remap 7.3.3.33F4h: MS/SD Clock Limit 7.3.3.34F5h: Reserved 7.3.3.35F6h: Reserved FCh-FFh: 7.3.4.1Implementation Characteristics 7.4Default Configuration Option: 7.5Reset 7.5.2.1RESET_N for EEPROM Configuration Chapter 8 Pin Reset States 8.1Pin Reset States Table 8.2 USB2640 Pin Reset States (continued) Table 8.3 USB2641 Pin Reset States Table 8.3 USB2641 Pin Reset States (continued) Chapter 9 DC Parameters 9.1Maximum Guaranteed Ratings 9.2Operating Conditions 9.3DC Electrical Characteristics Input Leakage O12 Type Buffer I/O12, I/O12PU & I/O12PD Type Buffer IO-U 9.4Capacitance Chapter 10 AC Specifications 10.1Oscillator/Clock (C1 + CS1) x (C2 + CS2) CL (C1 + CS1 + C2 + CS2) Chapter 11 Package Outline Chapter 12 GPIO Usage