Solid State Logic 82S6XL090A Microphone Input 2 Electronically Balanced, Line Input, Page

XLogic E Signature™ Channel Owner’s Manual

Microphone Input 2 (Electronically Balanced)

Measurement Conditions

Signal applied to Mic Input and measured at Output. Pad switched out and Mic Gain control set to +20dB.

Gain	Continuously variable from +20dB to +70dB
	Independently switchable 22dB Pad available
Input Impedance	> 1.2kΩ
Output Headroom	> +26dBu at onset of clipping
THD + Noise	Adjustable between < 0.05% and 5% from 20Hz – 20kHz
(-12dBu applied, +36dB gain)
Frequency Response	±0.3dB from 20Hz to 20kHz
Equivalent Input Noise	< –127dBu at maximum gain (input terminated with 150Ω)
Common Mode Rejection	> 75dB from 50Hz to 1kHz
(-10dBu applied, +30dB gain)	> 65dB at 10kHz

Line Input

Measurement Conditions

Signal applied to Line Input and measured at Output. Input Gain set to indent (0dB).

Gain	Continuously variable from –20dB to +20dB
Input Impedance	6kΩ
THD + Noise	< 0.005% from 20Hz to 20kHz
(+24dBu applied, 0dB gain)
Frequency Response	±0.25dB from 20Hz to 20kHz
Equivalent Input Noise	< –89dBu
(Input terminated with 150Ω)

Channel Output

Output is fully balanced and floating.

Gain	Continuously variable from –20dB to +20dB with indent at 0dB position
Output Headroom	> +26dBu at onset of clipping
Output Impedance	< 80Ω

Page 18