Solid State Logic 82S6XL090A owner manual Mounting, Connection

Installation and Operation

3.2Mounting

This unit is designed to be rack-mounted. It is 1 RU (44.5mm/1.75 inch) high, its depth is:

325 mm/12.8 inches not including heatsink.

365 mm/14.3 inches including heatsink

400 mm/15.75 inches including connectors

The XLogic E Signature Channel units incorporate reinforcement brackets into the chassis and so are suitable for direct rack-mounting. A 1RU space should be left above each unit to ensure adequate ventilation.

3.3Connection

There are five connectors on the rear panel:

• OUTPUT	(male XLR)
• KEY IN	(female XLR)
• LINE IN	(TRS jack socket)
• LINK	(TRS jack socket)
• INPUT	(female XLR)

OUTPUT	KEY IN	LINE INPUT
		IN

LINK

The XLR labelled ‘INPUT’ is for microphone signals; the ‘LINE IN’ jack socket is for line level signals such as a synthesiser or DAW output. Neither input is suitable for use with guitar pickups, piezo electric bugs etc.

If you have more than one unit, the dynamics side-chain of multiple units may be linked together by connecting the ‘LINK’ jacks together using a mono or stereo jack-to-jack cable(s).

The ‘KEY IN’ XLR provides line level access to the dynamics side-chain to enable the dynamics to be keyed from external sources.

The XLR labelled ‘OUTPUT’ is a line level output; connect this to your recorder, workstation or mixing desk.

Page 7