TV Controls and Connectors
Front Panel
To open the panel
|
| To open the front panel of your TV, push up the | ||
|
| panel door just under the “PUSH OPEN” mark. | ||
0 |
| 0 |
|
|
PUSH OPEN | TIMER | LAMP | POWER | POWER |
MENU
TV/VIDEO VOLUME CHANNEL
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
ItemDescription
1 MENU | Press to display MENU to activate the |
| activate the TV/VIDEO, – VOLUME + |
, B, b, v, and V buttons. Press again to exit MENU to and – CHANNEL+ buttons.
2 |
|
| Press to confirm the selection or setting. |
TV/VIDEO | Press repeatedly to cycle through the video equipment connected to the TV’s video inputs. | ||
|
|
|
|
3 |
|
| Press to adjust the volume. |
|
| ||
– VOLUME + |
| ||
|
|
|
|
4 |
|
| Press to scan through channels. To scan quickly through channels, press and hold either – or +. |
|
| ||
– CHANNEL + |
| ||
5TIMER LED When lit in orange, indicates one of the timers is set. When it is set, this LED will remain lit even if the TV is turned off. For details, see page 62.
6LAMP LED Flashes in red when the lamp for the light source has burned out. For details, see “Replacing the Lamp” on page 66.
7 | POWER | Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may |
|
| indicate the display unit needs servicing (see contacting Sony information on page 2). When the red |
|
| LED blinks only three times, the lamp door of the lamp unit or the lamp itself is not securely |
|
| attached (see page 67). |
|
|
|
8 | Infrared | Receives IR signals from the remote control. |
| Receiver | Do not put anything near the sensor, as its function may be affected. |
|
|
|
9 | POWER | Press to turn on and off the TV. |
|
|
|
q; | Speaker | Outputs the audio signal. |
✍The CHANNEL + button has a tactile dot. Use the tactile dot as a reference when operating the TV.
16