Setting Up the Channel List
After you finish connecting the TV, you can run the Initial Setup to create a list of available channels. The Initial Setup screen appears when you turn on the TV for the first time after hooking it up. If you choose to set up the channels at a later time, select the Auto Program option in the Channel setting to scan available channels (see below).
✍The Initial Setup feature does not apply for installations that use a cable box for all channel selection.
Using Initial Setup To run Initial Setup the first time you turn on your TV
the Connecting
1 Press | TV POWER |
to turn on the TV. |
The Initial Setup screen appears.
2 Press V or v to highlight the 
. The message “First please connect cable or antenna” and “Start auto program now?” will appear.
3 Highlight “Yes” then press 
.
Initial Setup
First please connect cable or antenna. Start auto program now?
YesNo
Move: | Select: | Exit: MENU |
TV
Auto Program performed through Initial Setup will automatically create a list of receivable channels.
✍Auto Program may take a few minutes to complete. If you cancel the Auto Program before all receivable channels are scanned, you may want to perform the task later (see “To run Auto Program at a later time” below).
✍If you selected “No” during the Initial Setup, the Initial Setup message will appear each time you turn on the TV until you complete the Auto Program as a reminder.
To run Auto Program at a later time
Before running the Auto Program, make sure that you have selected the correct signal input for your TV. See “Cable” under Selecting Channel Options on on page 56.
1 Select Settings in MENU, and then go to Channel settings. 2 Select Auto Program then select “Yes”.
✍Auto Program will create a list of receivable channels for the current input (VHF/UHF antenna or CABLE).
23