Location and Function of Parts and Controls

7 COMPONENT/RGB IN (A BKM-FW11 is preinstalled only in the FWD-42LX1.)

Y/G PB/CB/B PR/CR/R IN (BNC) : Connects to the analog RGB signal or component (YUV) signal output of a piece of video equipment or a computer.

HD VD IN : Connects to the synchronization signal output of a computer.

AUDIO (Stereo minijack) : Inputs an audio signal. Connects to the audio output of a piece of video equipment or a computer.

8 OPTION1 slot (VIDEO/COM port)

This slot supports video signals and communication function.

9 OPTION2 slot (VIDEO port)

(Only for the FWD-42LX1/42LX1E)

This slot supports video signals. The optional adaptor with communication function should be installed in

8OPTION1 slot.

Optional adaptors (Not supplied)

The connectors marked with 6 and 7 on the connector panel are slot-in types and can be fitted with any of the optional adaptors in the display; BKM-FW10, BKM-FW11 or BKM-FW12.

(A BKM-FW10 is the same as the connectors 6, and a BKM-FW11 is the same as the connectors 7.) The OPTION2 slot is equipped only on the FWD-42LX1/ 42LX1E.

For details on installation, consult your Sony dealers.

RGB/COMPONENT ACTIVE THROUGH ADAPTOR BKM-FW12 (Not supplied)

1

IN

THROUGH

 

 

2

OUT

RGB/COMPONENT

 

 

3

AUDIO IN

 

 

 

1 RGB/COMPONENT IN (D-sub 15-pin) : Connects to the component signal output or analog RGB signal output of a piece of video equipment or a computer.

2 RGB/COMPONENT OUT (D-sub 15-pin) : Connects to the component signal input or analog RGB signal input of a piece of video equipment or a computer.

3 AUDIO IN (Stereo minijack) :

Inputs audio signal. Connects to the audio signal output of a piece of video equipment or a computer.

For details on inputting a component signal to the connector, see “Pin assignment” on page 42 (GB).

Note

When the unit is not connected to an AC power or is in the standby mode, no signal is output from the

RGB/COMPONENT OUT.

10 (GB)