Using
Using On-screen Menus
Operating Through Menus
Menu operating buttons
Use the buttons on the display unit or the Remote Commander for menu operations.
Remote Commander | Control button section |
MENU |
|
ENTER |
|
Operation of the unit is explained in these operating instructions for the case of operation using the Remote Commander. The M/m and ENTER buttons on the Remote Commander have the same functions as the M/m and ENTER buttons on the display.
Note
Operation may differ in some cases since there is no </, button on the display.
Configuration of the menu
To select the language of the menus, see “Selecting the On- screen Language” on page 36 (GB).
1 Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode: | Standard |
Adjust Picture |
|
Adjust Sound |
|
|
|
Select | Set ENTER | Exit | MENU |
2 Press M/m to move the cursor (yellow) to the main menu items you want to select and press ENTER. The cursor moves to the next menu.
3 Press M/m to move the cursor (yellow) to the item you want to select and press ENTER.
The menu for the selected item appears. Select an different item by repeating this procedure.
4 Press M/m to adjust or select the setting and press ENTER to set it.
The setting is registered and the menu returns to the previous menu.
To complete the configuration and return to the normal screen, press MENU.
To return to the previous menu level, press M/m to move the cursor to 
and press ENTER or <.
Menu Guide
Note
Items that cannot be set or adjusted (depending on the setting or the type of signal input) show in dark gray.
PICTURE/SOUND CONTROL menu
Adjusts the quality of sound and picture.
PICTURE/SOUND CONTROL |
| |
|
|
|
|
|
|
| Picture Mode: | Standard |
| Adjust Picture |
|
| Adjust Sound |
|
|
|
|
Select | Set ENTER | Exit | MENU |
Picture Mode
Sets the image quality suitable for the type of picture or the brightness of the location where the unit is installed.
For details, see “Selecting Image Quality” on page 24 (GB).
Adjust Picture
You can make fine adjustment of the picture.
Set Picture Mode to any of “User1” to “User3” first.
Note
You cannot adjust the following items when Picture Mode is set to “Vivid” or “Standard.”
For details, see “Adjusting the Picture” on page 24 (GB).
16 (GB)