Watching the Picture

Input Signal, Picture Mode and Display Status Information

Input signal and Picture Mode information appear on the screen for about five seconds when the power is turned on or when the input signal is switched.

To disable this function, follow the steps below.

1 In the CUSTOM SETUP menu, press M/m to move the cursor (yellow) to “Display” and press

ENTER.

The following menu appears on the screen.

CUSTOM SETUP

Power Saving:

Standard

 

Speaker Out:

Off

 

Closed Caption:

Off

 

Display:

Off

 

Color Matrix:

On

 

HD Mode:

1080i

 

RGB Mode:

DTV

 

Sync Mode:

H/Comp

 

Illumination:

High

 

Remote

 

 

 

 

 

Select

Set ENTER

Exit MENU

2 Press M/m to set “Display” to “Off,” then press

ENTER.

To display the information

Set “Display” to “On” in step 2 above, then press ENTER. The factory default setting is “On.”

Note

You can display the input signal information and the time anytime by pressing the DISPLAY button on the Remote Commander, regardless of the above setting.

22 (GB)