Operating a Specific Display With the Remote Commander
Operating a Specific Display With the Remote CommanderUsing the supplied Remote Commander, you can operate a specific display without affecting other displays installed at the same time.
1 Press ID MODE ON on the Remote Commander. Monitor index numbers appear in black characters on the lower left menu on the screen. (Every display is allocated an individual preset index number from 1 to 255.)
For details, see “To change the index number” on page 40 (GB).
ON SET OFF
Index number
Index Number | 117 . . . |
2 Input the index number of the display you want to operate using the 0 – 9 buttons on the Remote Commander.
The input number appears right next to the index number of each display.
Input Number
1 2 3
4 5 6
7 8 9
0
ON SET OFF
Index Number | 117 117 |
3 Press ID MODE SET.
The characters on the selected display change to green while the others change to red.
ON SET OFF
You can operate the specified display indicated with green characters only.
(Power ON/STANDBY apply to the other displays, as well.)
4 When all of the setting changes have been completed, press the ID MODE OFF button. The display returns to the normal screen.
ON SET OFF
To change the index number
You can change the index number if necessary. When you change the number, use the buttons on the control button section of the display unit.
You cannot change the index number using the Remote Commander.
1 Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode: | Standard |
Adjust Picture |
|
Adjust Sound |
|
|
|
Select | Set ENTER | Exit | MENU |
2 Select “CUSTOM SETUP” and press ENTER. The following appears on the screen.
CUSTOM SETUP
|
|
|
Power Saving: | Standard |
|
Speaker Out: | Off |
|
Closed Caption: | Off |
|
Display: | Off |
|
Color Matrix: | Y/PB/PR |
|
HD Mode: | 1080i |
|
RGB Mode: | DTV |
|
Sync Mode: | H/Comp |
|
Illumination: | High |
|
Remote |
|
|
|
|
|
Select | Set ENTER | Exit MENU |
3 Select “Remote” with M/m and press ENTER. The Remote menu appears on the screen.
CUSTOM SETUP
Remote |
|
|
|
Index Number: | 1 |
Control Mode: | Display + Remote |
|
|
Select | Set ENTER | Exit | MENU |
4 Select the index number with M/m and press
ENTER.
The menu returns to the Remote menu.
40 (GB)