Illumination

Switches the brightness of the “SONY” logo on the front of the display unit.

Remote

This menu is used for remote control settings.

Index Number

Sets the index number of the display.

Note

When you set the index number, use the buttons on the display unit. The index number cannot be set with the Remote Commander.

For details on the Index Number, see “Operating a Specific Display With the Remote Commander” on page 40 (GB).

Control Mode

Selects the function of the Remote Commander. Display + Remote: Activates a remote commander

supplied with the display.

Display Unit Only: Disables the remote control function. You can only make settings for the display using the control buttons on the display unit.

Remote Only: Disables the controls on the display unit when you want to control it using the Remote Commander only. You can only make settings for the display using the Remote Commander.

Note

When operating this item, the modes you can select differ depending on the key you are using.

When using ENTER on the Remote Commander for setting, you can select only “Display + Remote” or “Remote Only.”

When using ENTER on the display unit for setting, you can select only “Display + Remote” or “Display Unit Only.”

Using On-screen Menus

INITIAL SETUP/INFORMATION menu

You can select the on-screen language or the input signal, or set the Security Lock option.

INITIAL SETUP/INFORMATION

 

 

 

 

 

 

 

 

Language:

English

 

Color System:

Auto

 

Auto Shut Off:

Off

 

Security Lock:

Off

 

Information

 

 

 

 

Select

Set ENTER

Exit

MENU

Language

Selects the on-screen language (Japanese, English, German, French, Spanish, or Italian).

For details, see “Selecting the On-screen Language” on page 36 (GB).

Color System

Selects the Color System of video signals. Auto: to set the Color System automatically. NTSC: to display NTSC signals NTSC4.43: to display NTSC4.43 signals PAL: to display PAL signals

SECAM: to display SECAM signals

PAL-M:to display PAL-M signals

PAL-N:to display PAL-N signals

PAL60: to display PAL60 signals

Auto Shut Off

When you set this item to “On,” the display unit automatically enters the standby mode when a signal is not input to the COMPONENT or DVI input connectors for more than about five minutes. The display unit automatically enters the power saving mode when a signal is not input to the DVI or RGB input connectors for more than about thirty seconds. While in the standby mode, press the 1POWER switch on the display unit or the POWER ON button on the Remote Commander to switch the display unit on. While in the power saving mode, the display unit is automatically turned on when a signal is input.

19 (GB)