![](/images/backgrounds/19359/19359-4425x1.png)
Press
The default setting is underlined.
MULTI SOURCE:
Select this setting to listen to different sound sources on each sub unit.
PARTY:
Select this setting to listen to the same sound source on multiple sub units.
To select the S-AIR mode from the system menu
1Press SYSTEM MENU on the unit.2Press TUNING/SELECT +/on the unit repeatedly until “MODE” appears, then press ENTER on the unit.
3Press TUNING/SELECT +/on the unit repeatedly to select “MULTI” or “PARTY,” then press ENTER on the unit.
The selectedTo check the
Notes
When you change the
When connecting the main unit to an
Use the sub units to listen to the music of an iPod connected to the main unit.
You can control the connected iPod from either the main unit or the sub units.
To use an iPod, refer to the user’s guide of your iPod.Using the main unit1 Place an iPod on the iPod connector as shown below.Now, you are ready to listen to the connected iPod using the sub units.
2 Select the iPod channel.When the S-AIR mode is set to “PARTY”:
Press PARTY CH on the remote repeatedly until “iPod” appears in the display.When the S-AIR mode is set to “MULTI SOURCE”:
The iPod channel is internally activated. Go to step 3.