Messages

CANCEL : Time out without pairing.COMPLETE : Pairing is completed.ID A : Sets the S-AIR ID to “A.”ID B : Sets the S-AIR ID to “B.”ID C : Sets the S-AIR ID to “C.”LINKED* : The sub unit is connected to the main unit.PAIRING : Pairing is in progress.

RMT OFF* : The sub units are not accepting signals from the remote because the remote control function is set to “RMT OFF.”

S-AIR* :Displayed from the point power of the sub unit is turned on until connection with the main unit is established.

TIME NG* : The Daily Timer start and end times are set to the same time.

UNLINKED* : The connection with the main unit is cut off.

* Displayed on the sub units only.

Precautions

Notes on use of the S-AIR product

As the S-AIR product transmits sound by radio waves, sound may skip when radio waves are obstructed. This is a characteristic of radio waves and is not a malfunction.

As the S-AIR product transmits sound by radio waves, equipment that generates electromagnetic energy, such as a microwave oven, may interfere with sound transmission.

As the S-AIR product uses the radio waves that share the same frequency as other wireless systems, such as wireless LAN or Bluetooth devices, interference or poor transmission may result. In this case, take the following steps:

Do not install the S-AIR product near other wireless systems.

Do not use the S-AIR product and the other wireless systems at the same time.

The transmission distance differs depending on the usage environment. Find a location where transmission between the main unit and the sub units is most effective, and install the main unit and the sub units there.

38GB