Press ENTER on the unit.

5

6 Repeat steps 1 through 5 to store other stations.

You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power supply cord or if a power failure occurs.

To call up a preset radio station using the main unitPress PRESET +/repeatedly.To call up a preset radio station using the sub units

1Preset radio stations on the main unit (see “Presetting radio stations” (page 28)).

2Select the tuner channel.

Press S-AIR CH repeatedly until “TUNER” appears in the display.

3Select “FM” or “AM.”

Press and hold S-AIR CH until “FM” changes to “AM” or vice versa.

4Press PRESET +/repeatedly to select a preset station.

Using an optional AV system

You can enjoy audio and video of the connected iPod with an optional AV system.

1 Connect an optional AV system (such as a TV, etc.) to the iPod AUDIO OUT L/R jacks and/or the iPod VIDEO OUT jack of the main unit using an optional audio cord and/or video cable.

2 Place an iPod on the iPod connector on the main unit.3 Start playback of the iPod.

See “Listening to iPod music using the S-AIR connection” (page 25).

Note

The tuner’s sound cannot be output through the iPod AUDIO OUT L/R jacks.

Before enjoying video, adjust the video settings on the iPod to the appropriate settings according to your situation.

Tip

Even if you change the S-AIR mode or the S-AIR channel using PARTY CH, audio and/or video from the connected iPod will continue to be output from the iPod AUDIO L/R jacks and/or the iPod VIDEO OUT jack.

Operations

29GB