Using the Timers

The sub units offer two timer functions. If you use the Daily Timer with the Sleep Timer, the Sleep Timer has priority.

Use buttons on the unit to set the timers.Sleep Timer:You can fall asleep to music. This function works even if the clock is not set.Press SLEEP repeatedly.

Note

Even if you set the timer, no sound is output from the sub units if playback on the connected main unit ends within the set time period or if communication with the main unit is cut off.

Daily Timer:

You can wake up to the sound of the connected main unit at a preset time. Make sure you have set the clock.

1 Press VOLUME +/repeatedly to adjust the volume level while viewing the volume level indication on the display.

2 Press CLOCK/TIMER MENU.3 Press /repeatedly to select “TIMER,” then pressCLOCK/TIMER ENTER.“ON TIME” appears, and the hour indication flashes.
4 Set the time to start playing.Press /repeatedly to set the hour, and then press CLOCK/TIMER ENTER.

The minute indication flashes. Use the procedure above to set the minute.

5 Use the same procedure as in step 4 to set the time to stop playing.6 Press /repeatedly to select the desired option.

The default setting is underlined.

ALARM:An alarm is output.

AUTO:

Sound from the connected main unit is output. However, an alarm sounds in the following cases.

When communication with the main unit is cut off.

When no sound is output from the main unit or the audio signal level is too low.

When the main unit is not ready for playback at the set start time. Note that the alarm continues to sound even if the main unit becomes ready after the start time has passed.

7 Press CLOCK/TIMER ENTER.The display shows the timer settings.

Operations

Continued 31GB