There is no sound.
Make sure the iPod is connected securely.Make sure the iPod is playing music.Adjust the volume of the sub units.Update your iPod to use the latest software.The iPod cannot be operated by the main unit or the sub units.Check that the iPod and the main unit are connected properly and that the main unit and the sub units are connected properly.
Depending on the iPod model you are using and its status, it may not be possible to operate the iPod using the main unit or the sub units.
Update your iPod to use the latest software.
The sound is distorted.Turn down the volume of the sub units.Set the “EQ” setting of the iPod to “Off” or “Flat.”The iPod cannot be charged.Make sure the iPod is connected securely.
Check that the power supply cord is connected securely and the main unit is turned on.
The iPod track information cannot be obtained.Depending on the iPod model you are using and its status, it may not be possible to obtain the track information properly during playback.
Up to 16 characters can be displayed on the displays of the sub units.
Check that the track information has been entered into the iPod.Check that the TV output setting on the iPod is on (Refer to the user’s guide of your iPod).
Check that the iPod is compatible with video output (Refer to the user’s guide of your iPod).
TunerSevere hum or noise, or stations cannot be received. (“TUNED” or “ST” flashes on the display of the main unit.)
Connect the antennas properly.Find a location and an orientation that provide good reception, and then set up the antennas again.
Keep the antennas away from the power supply cord to avoid picking up noise.Connect a commercially available external antenna.Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand.
Turn off nearby electrical equipment.