Wireless transceiver

Insert the supplied wireless transceiver (EZW-RT10) securely into the EZW- RT10 slot on the rear panel of each unit. Check the orientation of the mark when inserting the supplied wireless transceivers (EZW-RT10). Failure to do so may result in damage to the unit.

Notes

Make sure to turn off the main unit and the sub units when inserting or removing the supplied wireless transceivers (EZW-RT10). Failure to do so may result in damage to the unit.

Do not touch the terminals of the supplied wireless transceivers (EZW-RT10).

Do not insert any device other than the supplied wireless transceivers (EZW-RT10) into the EZW-RT10 slot.

S-AIR ID selector

Set the same S-AIR ID for the main unit and the sub units. For details on setting the S-AIR ID, see “Establishing the S-AIR connection” (page 20).

FM/AM antennas

Find a location and an orientation that provide good reception, and then set up the antenna.

Keep the antennas away from the power supply cord to avoid picking up noise.

PowerConnect the power supply cord and the power cord to a wall socket.
To use the iPod

Insert an iPod Dock Adapter into the iPod connector on the main unit before use.

For details on the supplied iPod Dock Adapters, refer to the instructions supplied with the Dock Adapters.

To remove the iPod Dock Adapter, pull it up with your fingernail or a flat object using the slot inside the adapter.

Slot

Getting Started
Continued 19GB