To change the AM tuning interval
The AM tuning interval is3Press TUNING/SELECT +/on the unit repeatedly until “AM STEP” appears, then press ENTER on the unit.
4Press TUNING/SELECT +/on the unit repeatedly to select “9K” or “10K,” then press ENTER on the unit.
“OK” appears.5Press ENTER on the unit again to confirm the setting.When you change the interval, all the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure.
To reset the main unit to factory settingsIf the main unit still does not operate properly, reset the main unit to factory settings.
1Disconnect and reconnect the power supply cord, and then turn on the unit.2Press SYSTEM MENU on the unit.
3Press TUNING/SELECT +/on the unit repeatedly until “RESET” appears, then press ENTER on the unit.
“RESET OK” appears.4Press ENTER on the unit again to confirm the setting.All
If the sub unit still does not operate properly, reset the sub unit to factory settings.
1Disconnect and reconnect the power cord, and then turn on the unit.
2Press /CANCEL, DISPLAY and on the unit at the same time.
AllOthers