On safety

Completely disconnect the power supply cord and the power cord from the wall socket (mains) if the main unit and the sub units are not going to be used for an extended period of time. When unplugging the units, always grip the plug. Never pull the cord itself.

Should any solid object or liquid get into the main unit and the sub units, unplug the units, and have them checked by qualified personnel before operating them again.

The power supply cord and the power cord can be changed only by a qualified service facility.

On placement

Do not place the main unit and the sub units in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light.

Be careful when placing the main unit and the sub units on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result.

On heat buildup

Heat buildup on the main unit and the sub units during operation is normal and is not cause for alarm.

Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot.*

Do not obstruct the ventilation holes.*

* The sub units only.

On the speaker system*

This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait about 15 to 30 minutes, and turn it back on.

If there is no improvement, move the unit far away from the TV.

* The sub units only.

Cleaning the cabinet

Clean the cabinet with a soft dry cloth. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.

Others

39GB